The biggest advantage of TOPSTAR compared to a spray cabin SPRAYSTAR is the application of the chemical on the skin without any dispersion.

In this way you have a saving of chemical (back and / or fixative) above 50%, saving over the disposal of sludge (the remaining 50% of the product that is not deposited on the skin) caused by the spraying cabin.

Also you have the energy savings indicated in the table below (electric power, water and compressed air) and less noise: 70 dB (A) for the TOPSTAR and 80 dB (A) for a spray cabin.

Finally, there is a better duration of tunnel transport’s wires and the elimination of the weekly cleaning of spray cabins (in the case of fixatives the cleaning is very difficult to do and it produces waste expensive to dispose).

SPRAYSTAR-W W.W. 3400 mm
Water consumption
Water consumption of a Spraystar-W spray cabin, in maintenance every 40 working hours (1,700 l)	42.50 l/h
Water consumption of a Scrubber mod. G22 (working)	22.00 l/h
Total Water consumption of a Scrubber mod. G22 every 40 hours for cleaning and waste sludge (750 l)	18.75 l/h
TOTAL	83.25 l/h
Water consumption during the washing of the spray guns at each article change	20÷35 l
Power	installed	absorbed
Gearmotor carousel	1.10 Kw	0.77 Kw
Water recirculation pump	4.00 Kw	2.80 Kw
Scrubber Engine	22.00 Kw	15.40 Kw
Scrubber Pump	0.75 Kw	0.52 Kw
TOTAL	27.85 Kw	19.49 Kw
Compressed air consumption
Compressed air consumption of a spray cabin	6,200 l/h
Blowing tube for remove dust from the skin	1,500 l/h
TOTAL	7,700 l/h

TOPSTAR
Power	installed	absorbed
TOTAL	7.85 Kw	5.20 Kw
Compressed air consumption
Machine	400 l/h
Pump	1,500 l/h
Blowing tube for remove dust from the skin	1,500 l/h
TOTAL	3,400 l/h
Water consumption
Water consumption during the washing at each article change	20÷35 l